Doxie Setup
1
Unpack Doxie
1.1
Remove Doxie’s protective lm and tape.
Power Up
1.2
Connect Doxie to an electrical outlet with the appropriate plug.
Wall Power
As an alternative to wall power, Doxie can also be powered with four (4)
AAA Ni-MH rechargeable batteries for on-the-go scanning.
Battery Power
Do not use other battery types, like alkaline batteries. SANYO® eneloop brand recommended.
Doxie has lm protecting its plastic surfaces
and tape to hold the paper guide in place.
To Next Page
Loading...