EasyManua.ls Logo

Dr.Fodisch PFM 92 C User Manual

Dr.Fodisch PFM 92 C
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Particle Flow Meter PFM 92 C
Operation manual
Dr. Födisch Umweltmesstechnik AG Telephone: +49-34205-755-0
Zwenkauer Strasse 159 Fax: +49-34205-755-40
D - 04420 Markranstädt e-mail: info@foedisch.de
Internet: www.foedisch.de

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Dr.Fodisch PFM 92 C and is the answer not in the manual?

Dr.Fodisch PFM 92 C Specifications

General IconGeneral
BrandDr.Fodisch
ModelPFM 92 C
CategoryMeasuring Instruments
LanguageEnglish

Summary

General Remarks and Safety Information

Safety Warning Signals

Details signal words (WARNING, ATTENTION, HINT) and associated symbols for safety in operation.

Safety Advices for Operation

General Safety Precautions

Crucial safety instructions for operation, handling, and modifications to prevent injury and damage.

Structure and Functionality

Triboelectric Measuring Principle

Details the triboelectric principle used for dust measurement and signal output generation.

Installation Procedures

24 VDC Operational Voltage Connection

Details the wiring and specific terminals for the 24 VDC power supply connection.

110/230 VAC Operational Voltage Connection

Details the wiring and specific terminals for the 110/230 VAC power supply connection.

Device Setup and Configuration

Adjusting Measuring Range and Amplification

Guides on adjusting the device's sensitivity and measuring range for optimal performance.

Selecting and Configuring Operation Mode

Instructions for selecting and configuring the device's operational mode for specific applications.

Setting Alarm Limit Values

Details how to set alarm thresholds for limit value violations using potentiometers and LEDs.

Operation and Handling Procedures

Adjusting Device Amplification

Provides detailed steps and guidance for adjusting the device's amplification and sensitivity.

Selecting Operation Modes

Describes the two available operation modes and their implications for monitoring and analysis.

Adjusting Limit Values for Alarms

Instructions on setting two separate alarm limit values using potentiometers and LEDs for threshold monitoring.

Failure Elimination and Troubleshooting

Related product manuals