What to do if Dr.Frei Blood Pressure Monitor shows E2 E4 error due to hand shaking?
If the Dr.Frei Blood Pressure Monitor displays 'E2' or 'E4' and indicates hand shaking during measurement, it means that there was hand or body shaking while measurement. To resolve this, keep a static position and measure again.
Why Dr.Frei Blood Pressure Monitor is not turning on?
If the Dr.Frei Blood Pressure Monitor displays nothing when you push the ON/OFF button, or if the battery icon flashes, it could be due to several reasons: * There might be no batteries installed. In this case, insert batteries. * The batteries might be worn out. Replace them with new batteries. * The polarities of the batteries might be placed wrongly. Ensure you insert the battery with the correct polarities.
What does the battery icon mean on Dr.Frei Blood Pressure Monitor?
If the battery icon is displayed on your Dr.Frei Blood Pressure Monitor, it means the battery has low power. Replace the battery and measure again.
How to fix E1 error on Dr.Frei Blood Pressure Monitor?
If your Dr.Frei Blood Pressure Monitor shows an 'E1' error, indicating that it can’t normally increase pressure, check your cuff for air leakage and replace it with a new one.
General| Brand | Dr.Frei |
|---|---|
| Model | M-200A |
| Category | Blood Pressure Monitor |
| Language | English |
Explains blood pressure, its types (systolic/diastolic), and daily fluctuations.
Presents WHO classification of blood pressure values and health recommendations.
Describes the color-coded indicator on the display for blood pressure ranges.
Explains the symbol for detecting irregular heartbeats during measurement.
Lists essential safety guidelines for using the blood pressure monitor.
Details the items included in the blood pressure monitor package.
Step-by-step guide on how to install batteries correctly into the device.
Instructions for setting the current time and date on the monitor display.
Guide on choosing the user profile for storing measurements.
Instructions on connecting and using the AC/DC power adapter.
How to connect the blood pressure cuff to the main unit.
Detailed steps on how to correctly position and secure the cuff on the arm.
Instructions on how to start and conduct a blood pressure measurement.
How to interpret the displayed blood pressure and pulse readings.
How to stop a measurement in progress if needed.
How to access and review previously recorded measurements.
Instructions on how to clear stored measurement data.
Lists precautions against extreme temperatures, humidity, dust, and sunlight.
Advises careful handling of the cuff to prevent damage from twisting or buckling.
Instructions for cleaning the monitor with a soft cloth and the cuff with damp cloth.
Guides on handling the tube carefully and keeping it away from sharp edges.
Warns against dropping the monitor or treating it roughly to avoid damage.
States that opening the monitor will spoil its calibration and void warranty.
To Next Page
