DR.ÖTEK MT-XE - LCD Display; Mode Cursor; Target ID Cursor; Normal Cursor

LCD
*Mode Cursor: indicates four ways with MODE LED: ALL METAL,
PASTURE, PARK, SAND. The DISC model has only a LCD and no LED
indication.
*Target ID Cursor: divided into 6 categories. To indicate the target metal
sought for.
*Normal Cursor: boot preset, "NORM" light, into the most common
working mode, namely ALL-METAL, sensitivity level 3, volume middle
level.
*Digital ID Cursor / Pinpoint Cursor: Two-digit 01-99, fine metal
indication, and double P-P cursor. When the P-P character is displayed,
enter the Pinpoint character.
*Coin Depth Cursor: It is divided into four levels. Indicates the
approximate depth of the 25 ￠ silver coins in the neutral soil.
*Volume Cursor: Indicate the volume. Dive into three levels, silent, low
volume, high volume.
*Sens Cursor: It is divided into four levels, all lit to the highest.
*Battery power cursor: It is divided into two levels, indicating the
battery power. The battery pattern flashes and the battery should be
replaced.
LED
MODE LED: Display in 4 ways together with the MODE cursor: ALL
METAL, PASTURE, PARK, SAND.
P-P Strength LED: In the PINPOINT state, display the signal intensity,
at level 4.