75 MEIGS ROAD, P.O. BOX 25, VERGENNES, VERMONT 05491
©2016 Country Home Products, Inc. All rights reserved 375871A
Daily Checklist for the DR POWER GRADER
To help maintain your DR POWER GRADER for optimum performance, we recommend you follow this checklist each time
you use your POWER GRADER.
[ ] HARDWARE: Check all nuts and bolts to be sure that the components are secure.
[ ] FRAME: Check all welds to be sure that the frame is intact and secure.
[ ] CLEAN: Make sure the Tooth Bar and the Frame are clean and free of debris.
End of Season and Storage
Hose down the DR POWER GRADER. Remove the Tooth Bar to clean it of debris and then replace it after cleaning the
mounting surfaces.
Lubricate the Rear Wheels.
Wipe down the DR POWER GRADER to remove any moisture and dirt that may have accumulated.
If possible, store the Power Grader in a dry, protected place. If it is necessary to store the Power Grader outside, cover it
with a protective material.
Before performing any maintenance, you must first shut off the tow vehicle, remove the key and set the parking brake.
Before performing any maintenance, you must first shut off the tow vehicle, remove the key and set the parking brake.
To Previous Page
Loading...