DR PREMIER 320 - Page 26

26 DR
®
PRO CHIPPER SHREDDER
Parts List – Drive Assembly
Note: Part numbers listed are available through DR Power Equipment.
Ref# Part# Description
1 A0001244985 Base (PRO 420)
A0001244996 Base (PREMIER 320)
2 A0001515282 Axle
3 311081 Wheel, 14″, 5 Spoke
4 A0001515278 Bracket, Axle
5 A0001994506 Leg, Support (PRO 420)
A0001515280 Leg, Support (PREMIER 320)
6 A0002074313 Plug, 1″ X 1″, 11ga Tube
7 A0002277804 Engine w/Labels, DR 9.2hp 301cc,
E/S R300 (420 E/S)
A0002277803 Engine w/Labels, DR 9.2hp 301cc,
M/S R300 (420 M/S)
A0002277799 Engine w/Labels, DR 9.59tq/6.6hp,
M/S R225 (320 M/S)
8 111491 Bolt, HCS, 1/4-20 X 1″, GR5, ZP (420
E/S)
9 333311 Nut, Nylon Lock, Flanged, 1/4-20
(420 E/S)
10 134471 Battery, 9 Ah 12v (420 E/S)
Ref# Part# Description
11 A0001294574 Bracket, Battery (420 E/S)
12 286971 Pad, Battery, 2.5″ X 6.125″ (420 E/S)
13 242301 Strap, Battery, 9ah (420 E/S)
14 294871 Boot, Rubber, Red
15 333321 Nut, Nylon Lock, Flanged, 5/16-18
16 333331 Nut, Nylon Lock, Flanged, 3/8-16
(PRO 420)
333321 Nut, Nylon Lock, Flanged, 5/16-18
(PREMIER 320)
17 345121 Bolt, Hex, Flange, 3/8-16 X 0.75″, GR5
18 344071 Bolt, Hex, Flange, 3/8-16 X 1.5″, GR5,
ZP (PRO 420)
333521 Bolt, Flange, 5/16 X1.5″ (PREMIER
320)
19 A0001994508 Anti-slip Tape, Base
20 A0001994507 Wire Harness (420 E/S)
21 137581 Label, Check Oil
22 188871 Label, HOT Surface
23 333331 Nut, Nylon Lock, Flanged, 3/8-16