Chapter 6: Transport And Storage
Transport
Storage
If the Engine will not be used for a long time, storage should be as follows:
1)
The storage area should be dry and free of dust.
2)
Completely drain fuel out of the fuel tank and carburetor.
3)
Replace Engine Oil.
4)
Remove the Spark Plug. Fill about a spoon of fresh Engine Oil onto the cylinder. Pull the recoil starter rope slowly to
distribute Engine Oil evenly. Reinstall the Spark Plug.
5)
Close the choke to protect dust from entering Engine.
6)
Cover the Engine to protect against moisture and dust.