Dräger Infinity Series - Whats New; Support of gas monitoring functions in anesthesia and operating room environments; Support of network laser printers; Improved SpO2 performance during motion artifact

Electrode & Lead Placement
DO’S & DO NOT’S
Do Place the electrode on a clean and dry area of skin.
Utilize soap, water and dry.
Do Remove hair if necessary for proper electrode
placement.
Do Change electrodes Q 24-48 hours, or per hospital
policy.
Do Not Utilize alcohol to dry and clean area of skin
for electrode placement.
Do Not Place electrodes over bony prominences or
area of increased muscle movement/activity.
Do Not Assume electrodes are “Good” if the tape
portion is attached to the patient’s skin.
Do Not Braid, tie or knot leads.
Infinity Delta/Delta XL/Kappa - Quick Reference Guide
Intended for quick reference only.
Refer to Instruction For Use Manual.
INFINITY DELTA/DELTA XL/KAPPA - QUICK REFERENCE GUIDE
© 2010 Draeger Medical, Inc.
| 02