Dräger Infinity Series Quick Reference Guide

Getting Started - Rotary Knob
The rotary trim knob at the bottom right corner of the
monitor turns left and right. It highlights selections and
requires pressing in to confirm the selections (click).
The monitor does not need to be powered off between
patients. Remember to “Discharge” between patients
once all documentation has been completed. This
erases all trended information and returns the monitor
to default settings.
CONNECTING YOUR PATIENT TO THE MONITOR
- Prep the patient’s skin, place ECG electrodes
appropriately and connect leads.
- Place SpO
2
sensor on the patient.
- Place NIBP cuff on the patient.
- Press Main Screen Key to begin active patient
monitoring.
TO ADMIT AT THE BEDSIDE USING THE ROTARY KNOB
Admission via the Infinity Central Station is easiest,
however, you may admit from the bedside monitor:
- Press Menu fixed key.
- Highlight Admit/Discharge, “click”.
- Highlight Admit and enter the patient’s data using the
Rotary Knob.
Infinity Delta/Delta XL/Kappa - Quick Reference Guide
Intended for quick reference only.
Refer to Instruction For Use Manual.
INFINITY DELTA/DELTA XL/KAPPA - QUICK REFERENCE GUIDE | 06
© 2010 Draeger Medical, Inc.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)