Dräger RVP 5000 User Manual

6 | Dräger RVP - Communication | Middelborg/Olsson | November 2011
Each controller has to get its own
address. The addressing starts from 1
up to 5, regarding the quantity of
connected controller.
Baud rate, Bits, Parity and Stop bit
must not be changed. The default
settings are 19200/8N1.
The controller will be visible on the
RVP 2400 with the same numbers
addressed in the configuration
software.
Dräger RVP - Communication
RVP 2400

Dräger RVP 5000 Specifications

General

Brand	Dräger
Model	RVP 5000
Category	Monitor
Language	English