Need help?Do you have a question about the Dräger X-am 2800 and is the answer not in the manual?
General| Brand | Dräger |
|---|---|
| Model | X-am 2800 |
| Category | Gas Detectors |
| Language | English |
General safety guidelines for users of the X-am 2800 gas detector.
Precautions for operating the X-am 2800 in potentially explosive environments.
Explanation of alert icons, signal words, and their consequences.
List of brands and their owners associated with the product.
Definitions of common abbreviations used in the document.
Detailed illustration and identification of the X-am 2800 components.
Specifies the operational purpose and application areas for the X-am 2800.
Information regarding certifications and compliance standards for the device.
Interpretation of icons and symbols displayed on the X-am 2800.
Describes the device's audible and visual indicators for operation and status.
Details the periodic sound signal indicating device functionality.
Explains LED indicators and the D-Light feature for status and compliance.
Step-by-step instructions for powering the X-am 2800 on and off.
Essential checks and actions before using the gas detector for measurements.
Guide to pairing the X-am 2800 with a smartphone via Bluetooth®.
Important warnings and guidelines for safe and effective use of the device.
How the device displays measurements and operates during normal monitoring.
Information on how the X-am 2800 alerts users to hazardous gas conditions.
Describes the device's special operating states and their visual indicators.
Details the alarm triggered for sensor overload and how to acknowledge it.
Instructions on accessing frequently used functions via the Quick menu.
How to disable audible and vibration alarms using PC software.
Accessing device, channel, firmware, and Bluetooth® information.
Retrieving details about the device's hardware and software.
Recommended schedule for checks and maintenance by experts.
Recommended frequency for calibrating the gas detector's sensors.
Information on properties and types of test gases used for calibration.
Procedures for conducting a bump test to verify sensor functionality.
Procedure to measure and verify the sensor's reaction time to test gas.
General guidance and warnings before performing calibration procedures.
Steps for zero calibration using clean ambient air.
Procedure for calibrating individual sensors with a specific test gas.
Instructions and safety precautions for charging the device's battery.
Procedure and safety warnings for battery replacement.
Guidelines for cleaning the gas detector and avoiding damage.
Default configuration parameters and their descriptions.
Detailed settings for device operation and individual sensor parameters.
Default alarm configurations, including latching, acknowledgement, and signal types.
Technical specifications for the X-am 2800 gas detector.
To Next Page
