EasyManua.ls Logo

Dragster DAF 1004 User Manual

Dragster DAF 1004
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
DAF SERIES
POWER AMPLIFIERS
installation and operation
Question and Answer IconNeed help?

Do you have a question about the Dragster DAF 1004 and is the answer not in the manual?

Dragster DAF 1004 Specifications

General IconGeneral
Channels4
RMS power at 4 Ohm100W x 4
RMS power at 2 Ohm150W x 4
RMS power at 4 Ohm (bridged)300W x 2
Frequency response10Hz - 30kHz
Input sensitivity0.25V - 4V
Low pass filter50Hz - 250Hz
High pass filter50Hz - 250Hz
Dimensions340mm x 250mm x 60mm

Summary

Installation Guide

Positioning and Ventilation

Ensure proper airflow around the amplifier's heat sink for efficient heat dissipation and safe operation.

Amplifier Protection Measures

Avoid installing in locations prone to foreign objects, liquids, or drilling into fuel tanks for safety.

Fuses and Wire Gauge

Use appropriate gauge power/ground wires and fuses near the battery and amplifier for safety.

General Installation Warnings

Verify speaker power ratings and impedance match the amplifier's high power output to prevent damage.

RCA Connection Procedures

RCA Preamp Output Usage

Utilize the preamp output for a full-range signal to feed secondary amplifiers in multi-amp systems.

4-Channel RCA Input Configuration

Employ a 'Y' adapter to split a single RCA output for connection to all four amplifier input channels.

Speaker Wiring Configurations

1-Channel Mono Load Wiring

Details for connecting DAF 3001/5001/7001 and DAF 12KW amplifiers for 1-ohm mono load configurations.

Bridging Mono Channel Amplifiers

Instructions for bridging DAF 3001/5001/7001 and DAF 12KW amplifiers for increased power output.

2-Channel Basic Configuration

Wiring diagrams for DAF 2502 and DAF 4002 amplifiers in a standard 2-channel stereo setup.

2-Channel Bridged Subwoofer Setup

Guides for bridging DAF 2502 and DAF 4002 amplifiers to create a powerful 2-ohm bridged subwoofer output.

4-Channel Subwoofer Wiring

Wiring options for DAF 2502 and DAF 4002 amplifiers to connect multiple 4-ohm subwoofers.

4-Channel Stereo Load Connection

Diagrams for connecting DAF 1004/1754 amplifiers in a 2-ohm stereo load configuration for four speakers.

4-Channel 3-Channel Configuration

Instructions for setting up DAF 1004/1754 amplifiers in a 3-channel system for versatile audio output.

Amplifier Controls and Features

Monoblock Amplifier Controls (DAF 3001-12KW)

Details on input gain, subsonic filter, bass EQ, and phase control for monoblock models.

2-Channel Amplifier Controls (DAF 4002)

Explanation of input gain, crossover, and diagnostic indicators for the DAF 4002 amplifier.

2-Channel Amplifier Controls (DAF 2502)

Overview of input gain, crossover settings, and remote subwoofer control for the DAF 2502.

4-Channel Amplifier Controls (DAF 1004/1754)

Information on input gain, crossover, and remote subwoofer control for 4-channel models.

Amplifier Specifications

Monoblock Class D Specifications

Detailed technical specs for DAF 3001, 5001, 7001, and 12KW models, including power and frequency response.

2-Channel Class A/B Specifications

Technical data for DAF 2502 and DAF 4002 amplifiers, covering power, THD, and dimensions.

4-Channel Class A/B Specifications

Technical data for DAF 1004 and DAF 1754 amplifiers, including power, crossover ranges, and dimensions.

Related product manuals