Need help?Do you have a question about the Dragster DAF 2502 and is the answer not in the manual?
Details on connecting power, ground, and remote turn-on wires to the amplifier for proper operation.
Information regarding the protection mechanisms of the amplifier to prevent damage.
Important precautions and advice for correctly wiring speakers to the amplifier.
Wiring diagrams illustrating 1-ohm mono load configurations for specific amplifier models.
Instructions and diagrams for bridging two mono channel amplifiers for increased power output.
Diagrams for basic 2-channel setup and 2-ohm bridged subwoofer connections.
Wiring diagrams for 4-channel speaker setups, including stereo and bridged options.
Explanation of input signal levels and gain adjustment for optimal performance.
Details on using subsonic, high-pass, and low-pass filters for sound tuning.
Information on the remote subwoofer level control and its usage.
Understanding the power status and diagnostic LEDs on the amplifier.
Detailed specifications for Monoblock Class D amplifiers including power, frequency response, and dimensions.
Specifications for 2-Channel Class A/B and 4-Channel Class A/B amplifiers.
General| Channels | 2 |
|---|---|
| THD | < 0.05% |
| Damping factor | > 200 |
| Input sensitivity | 0.2V - 6V |
| Bass boost | 0 - 18 dB |
To Next Page
