Need help?Do you have a question about the DRAKE MN2700 and is the answer not in the manual?
Details the functions and benefits of the MN2700 impedance-matching network.
Lists the technical details including frequency coverage, impedance, and power capabilities.
Instructions for carefully unboxing the unit and checking for damage.
Guidance on selecting an optimal placement for the MN2700.
Details necessary connections and grounding for the MN2700.
Explains how to connect various antenna types to the rear panel.
Explains the function of each control on the front panel of the MN2700.
Details the input and output connectors on the rear of the unit.
Describes the installation and use of the accessory balun with the MN2700.
Step-by-step guide for tuning the MN2700 to match an antenna.
Method for tuning the MN2700 with minimal interference using a dummy load.
Instructions on how to read reflected power using the MN2700 meter.
Guidance on using the MN2700 with transceivers or T/R switching systems.
Guidance on basic maintenance and troubleshooting for the MN2700.
General| Type | Communications Receiver |
|---|---|
| Frequency Range | 0-30 MHz |
| Tuning Steps | 1 kHz |
| IF Bandwidths | 6 kHz |
| Modes | AM, SSB, CW |
To Next Page
