899262c.doc01‐26‐17 5
Action... Result...
STEP 6: Once the instrument
returns to the Home screen, a
message at the bottom of the
screen reports that the
measurement firmware is being
copied.
NOTE: It is very important to not
interrupt this process.
Once the firmware update is
complete, the instrument
automatically restarts and begins
operating with the new firmware
version.
HDP
Q
-518
STEP 7:
From the Home Screen,
press the instrument icon
located at the top center of the
screen.
By pressing the instrument
icon will bring you to the next
screen, this screen displays the
latest firmware installed in the
instrument .
Upgrade Firmware, continued
Continued on next
page
To Next Page
Loading...
