Draper 200 Series - User Manual

CONTACT US
+44 (0) 23 8049 4344
+44 (0) 23 8049 4333
Draper Tools Limited, Hursley Road,
Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.
Helpline:
Sales Desk:
Internet: www.drapertools.com
E-mail: sales@drapertools.com
General Enquiries: (023) 8026 6355
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Helpline for details of an agent in your local area.
YOUR DRAPER STOCKIST
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
IMPORTANT: Please read these instructions carefully to ensure the safe and effective use of this product and save
these instructions for future reference. This manual has been compiled by Draper Tools and is an integrated part of the
product with which it is enclosed and should be kept with it for future references.
This manual describes the purpose for which the product has been designed and contains all the necessary information
to ensure its correct and safe use. We recommend that this manual is read before any operation or, before performing
any kind of adjustment to the product and prior to any maintenance tasks. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tools policy
of continuous improvement determines the right to make modifications without prior warning.
200 SERIES
MULTIMETER
41817 & 41818
DBMC0617

Summary

Guarantee Information

Product Guarantee Terms

Details the product's warranty coverage, duration, conditions, and exclusions for defects.

Introduction and Specifications

General Specifications

Lists detailed technical specifications including voltage, current, resistance, and temperature ranges.

Health and Safety Precautions

Safety Precautions

Lists critical safety instructions to prevent electrical shock, personal injury, and equipment damage.

Product Identification

Component Identification

Operating Instructions

DC Voltage Measurement

Guides on connecting leads and setting the range to measure DC voltage.

AC Voltage Measurement

Guides on connecting leads and setting the range to measure AC voltage.

DC Current Measurement

Guides on connecting leads and setting the range to measure DC current.

Resistance Measurement

Temperature Measurement (Model 41818)

Transistor Testing

Diode Test Procedure

Continuity Test

Maintenance and Symbols

Battery Replacement Safety

Explanation of Symbols

Draper 200 Series Specifications

General

DC Current Ranges	200µA, 2mA, 20mA, 200mA, 10A
Diode Test	Yes
Continuity Test	Yes
Battery	9V
Display	3.5 digit LCD
DC Voltage Ranges	200mV, 2V, 20V, 200V
AC Voltage Ranges	200V
Resistance Ranges	200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ