DECLARATION OF CONFORMITY
We Draper Tools Ltd. declare under our sole responsibility that the product:
Stock No. 26920. Part No. 501D.
Description: 3 in 1 Metal Voltage and Stud Detector
To which this declaration relates is in conformity with the following directive(s):
89/366/EEC
With reference to: EN50081-1 (EN55022), EN50082-1 (IEC801-2) and EN5082-1 (IEC801-3).
J. N. Draper
Managing Director
This extremely useful tool has three functions, namely the detection of metal, wiring and wood
framing. The tool gives a visual and audible warning upon detection.
Features include:
●
Metal voltage and stud detection in one unit.
●
Instant visual and audible warning.
●
Low power consuming light emitting diodes and buzzer indicators.
●
Powered by a readily available 9V PP3 battery (not supplied).
●
Fast accurate and easy to use.
Metal Detection: This tool will detect screws, nails, RSJ’s or trace the route of metal conduits,
gas and water pipes.
Wiring Detection: This tool will detect the presence of live wiring and trace its routing.
Wood Framing: This tool will detect the location of hidden wood frames, posts, beams, studs
and joists.
Note: Maximum depth of penetration is approx. 27mm.
- 2 -
✰✫✌
COMBINED METAL, VOLTAGE & STUD
DETECTOR
■ STOCK No.26920. ■ PART No.501D.
To Next Page
Loading...
