What to do if red light and sound pulse before using Draper 26920 during Voltage detection?
If the red light and sound pulse before use during Voltage detection with your Draper Metal Detector, the first thing to try is checking or replacing the battery.
What to do if red light and buzzer sounds during Stud detection with Draper Metal Detector?
If the red light remains on and the buzzer sounds during Stud detection on your Draper Metal Detector, try this: First, hold the detector in the air and turn the blue dial fully towards the on/off switch. If the red light remains on, the detector may need recalibration.
What to do if red light stays on and buzzer sounds during Metal/Voltage detection with Draper Metal Detector?
If the red light remains on and the buzzer sounds during Metal/Voltage detection with your Draper Metal Detector, try the following: Hold the detector in the air and turn the blue dial fully towards the on/off switch. If the red light remains on, the detector may need recalibration.
Why does the green light remain on during Metal/Voltage detection on my Draper 26920?
If the green light remains on during Metal/Voltage detection with your Draper Metal Detector, this indicates that the detector is functioning correctly.
Introduces the tool's functions, features, and includes a declaration of conformity.
Instructions for battery installation and identification of unit parts.
Steps for detection, including safety warnings and operational notes.
Guide for detecting wood studs and important notes on its application.
Techniques for improving detection accuracy and detailed calibration steps.
Tips for stud detection confirmation and a table of common faults with actions.
General| Brand | Draper |
|---|---|
| Model | 26920 |
| Category | Metal Detector |
| Language | English |
To Next Page
