- 15 -
10. MAINTENANCE
10.1 MAINTENANCE AND PARTS REPLACEMENT
Note:
Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep
your tool in good working condition.
The motor must be correctly ventilated during tool operation. For this reason avoid blocking the air
inlets. After use disconnect the tool from the power supply and vacuum the ventilation slots.
Use a cloth or a brush to clean the housing.
Never use petrol, solvents or cleaning agents that can damage plastic.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
To Next Page
Loading...