Draper DA25/230 User Manual

Instructions for connecting the 230V machine to the power supply, including plug and fuse details.

Chart detailing recommended extension lead sizes based on ampere rating and length.

Read manual, check parts, disconnect power before servicing, and ensure correct earth connection.

Avoid dangerous environments, keep guards, avoid accidental start, do not overload, check pressure.

Keep children away, use safety goggles/mask, and use recommended accessories.

Identifies key parts of the 50 Litre Air Compressor, including gauges, valves, and motor.

Procedure for unpacking and checking the air compressor for condition and damage.

Instructions for connecting to power, checking the drain valve, and starting the compressor.

Explanation of how the pressure switch assembly controls motor operation based on pressure.

Check oil level and drain condensate from the receiver.

Clean air filter, check drive belt tension.

Replace oil, clean external surfaces and motor fan cowling.

Check and replace valves if damaged or worn.

Importance of correct pressure switch adjustment for performance and to prevent faults.

Procedure for adjusting the cut-out pressure level using the regulating screw.

Lists common issues like overload trips, high oil consumption, noisy operation, and their possible causes.