Need help?Do you have a question about the Draper DT2 and is the answer not in the manual?
Details technical specifications including stock number, part number, rated input, maximum output, IP rating, working temperature, and time setting interval.
Ensures safe operation by specifying indoor use only and matching appliance voltage/frequency ratings.
Informs users that batteries are fully charged within 2 hours of connection to mains power.
Allows preset specific on/off times for home appliances, ideal for energy saving and security.
Enables timed appliance switching and irregular operation for automation and burglary prevention.
LCD shows program status and real time. Supports up to 140 on/off programs weekly.
Identifies and labels all buttons, the LCD display, and the socket for user familiarity and operation.
Explains the 12-hour (AM/PM) and 24-hour (00:00-23:59) display options available on the LCD.
Instructions on how to toggle between 12-hour and 24-hour display formats using the CLOCK button.
Step-by-step guide to select the desired day(s) of the week for program scheduling.
Detailed procedure for accurately setting the current hour and minute on the timer.
Guidance on how to activate or deactivate the summer time feature by adjusting the clock.
How to access program setting from real-time display using the ^+ button, showing '1ON'.
Sequence for selecting program groups, ON/OFF times, and countdown using ^+ and - buttons.
Procedures to set the week pattern and specific on/off times for chosen program groups.
Instructions for changing or replacing existing preset programs by repeating setting procedures.
Explains ON (always on), AUTO (resumes preset), and OFF (always off) modes for program override.
Details on when countdown, random, and auto on/off functions are active or inactive.
Step-by-step guide for connecting appliances to the timer and the timer to the AC socket for power.
Guidance on proper disposal of the timer according to national regulations and environmental safety.
How to access countdown mode, set ON/OFF status, and specify hours, minutes, and seconds.
Instructions on starting and stopping the countdown using the CD button, indicated on the LCD.
Details on minimum/maximum times for power off (26-42 min) and power on (10-26 min).
How to activate and stop the random function using the RND button, indicated by 'r ON'/'r OFF' on LCD.
To Next Page
General