Section 1 - Motor Types, Names
and Voltage
These instructions apply to all Draper medium duty
motorized window shades using the following motors:
MOTOR NAME MOTOR VOLTAGE
Sonesse 50 120VAC
Sonesse Ultra 50 120VAC
Sonesse RTS 120VAC
Sonesse RTS Ultra 120VAC
Sonesse RS485 120VAC
Sonesse RS485 Ultra 120VAC
Section 2 - Optional Hardware
Accessories for
Light Gap Reduction
Optional light gap reduction hardware (listed below)
may be included with the Motorized FlexShade
®.
Light gap reduction hardware is provided in
stock lengths unless otherwise specified. It is
the installers responsibility to measure, cut and
properly install this hardware in a manner that does
not interfere with shade operation.
'L' Angle
'U' Channel
'H' Channel
Overview - Motorized FlexShade Components
Contents
Overview Motorized FlexShade Components ................................................ 1
Please Read Warnings and Safety Information ................................................... 2
Please Read Field Adjustments, Cleaning and Maintenance .............................2
Section 1 Motor Types, Names and Voltage...................................................1
Section 2 Optional Hardware Accessories for Light Gap Reduction ...........1
Section 3 Mounting Brackets (Brackets Only Installation) .........................3
Section 4 Endcaps with Fascia ........................................................................3
Section 5 Surface Headbox or Pocket Headbox ............................................4
Section 6 Electrical Connections ....................................................................4
Section 7 Limit Switch Adjustments ..............................................................5
Section 7 120V Components, Motors and Controls .......................................6
Section 8 RTS Components, Motors and Controls ........................................ 7
Section 9 RS485 Components, Motors and Controls ....................................8
CAUTION
Read and understand all warnings
(Page 2 of this document) before
beginning installation.
If you have any difficulties installing or servicing your
Motorized FlexShade, call your dealer or Draper, Inc.
Endcap (L)
for Fascia
Endcap
Cover (R)
Fascia
Motor Mounting Plate
Endcap (R)
for Fascia
Endcap
Cover (L)
Brackets
Only (L)
Brackets
Only (R)
M12
Cable
Retainer Clip
FlexShade Motor (3 options)
120V Standard AC Motor
120V RTS AC Motor
120V RS485 Intelligent AC Motor
TOOLS REQUIRED
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2018 All Rights Reserved | FORM: FSMO_Inst18
Motorized FlexShade
®
Motor Operated Window Shades with Several Control Options
INSTRUCTIONS
INSTALLATION & OPERATION
To Next Page
Need help?
General
