Drawell YP20002 - Balance Operation and Installation; Operation Key Functions During Use; Choosing the Installation Site

5
Operation Keys
Key
During Weighing
Press once and Release
Press and hold for a
while
ON/OFF Turn on or turn off the balance —
COU Select the counting function —
TAR/CAL
Tare the balance(setting it to
zero)
Performs calibration
UNIT Select the unit —
Choosing the Installation Site
The measuring performance of the balance is greatly influenced by the
environment where it is installed.
Observe the following points to ensure safe and accurate weighing.
Caution
Do not use the balance anywhere exposed to explosive, combustible or
corrosive gases.
This could cause fire or trouble.