DL241 OPERATORS’ MANUAL 11
TECHNICAL SPECIFICATIONS
(Measurements taken at +4dBu operating level where applicable)
INPUT IMPEDANCE 20KÙ
MAXIMUM INPUT LEVEL +20dBu
OUTPUT IMPEDANCE 50 Ù (bal), 100 Ù (unbal)
MAXIMUM OUTPUT LEVEL +20dBu
BANDWIDTH <10Hz to 22KHz -1dB
NOISE AT UNITY GAIN with Expander Off
Wideband 22Hz - 22KHz CCIR ARM IEC A Q-Pk CCIR
AV -90dB -95dB -95dB -97dB -84dB
RMS -88dB -93dB -93dB -95dB -82dB
DISTORTION
100Hz 1KHz 10KHz
Unity Gain, +4dBu input < 0.03% < 0.02% <0.03%
+14dBu input, 10dB Gain Red. < 0.1% < 0.1% < 0.1%
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 9 Watts
FUSE RATING 32mA for 230Volt, 63mA for 115Volt
CONFORMING TO IEC 127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT (incl packaging) 3.2 Kgs
To Next Page