Draytek Vigor 2763 Series - User Manual

i
Vigor 2763 Series
VDSL2 Security Router
Quick Start Guide
(Wireless models)
Guide Version: 1.0
Region: United Kingdom & Ireland
For updates and support, visit www.draytek.co.uk
March 2022 / Firmware V4.2.3
Note: Product specification is subject to continuous evolution which may
not always be reflected in current documentation. For the formal specification
and details of the supported features of your product, please refer
only to the web site at www.draytek.co.uk

Summary

Safety and Warranty Information

Panel Explanation

Hardware Installation

Connecting the Vigor Router

Setup and Configuration

Accessing the Router Web Interface

Explains how to open the router's web interface using a browser and handle security warnings.

WAN1 ADSL & VDSL Connection Setup

Guides on configuring WAN1 for ADSL and VDSL internet connections.

PPPoE Connection with FTTC VDSL2

Step-by-step guide to setting up a PPPoE connection for FTTC VDSL2 internet.

PPPoE;PPPoA Configuration Settings

Verifying PPPoE Connection Status

Explains how to check the VDSL and PPP connection status on the Online Status page.

DHCP Static IP Connection with FTTC VDSL2

Guide for configuring DHCP or Static IP for FTTC VDSL2 internet connections.

DHCP Static IP Configuration Settings

MPoA Static Dynamic IP Settings

Configuration for MPoA, Static, or Dynamic IP connections, including WAN connection detection.

PPPoA Connection with ADSL ADSL2+

Verifying PPPoA Connection Status

Getting Further Help

Draytek Vigor 2763 Series Specifications

General

LAN Ports	4 x Gigabit Ethernet
USB Ports	1 x USB 2.0
Firewall	Yes (SPI, DoS/DDoS protection)
Operating Modes	Router, Bridge
VLAN	Yes
QoS	Yes
Power Supply	DC 12V
WAN Ports	1 x Gigabit Ethernet
VPN Support	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing