9
On the next page as shown below, please select the WAN interface that you use.
If DSL interface is used, please choose WAN1; if Ethernet interface is used,
please choose WAN2; if 3G USB modem is used, please choose WAN3. Then click
Next for next step. WAN1, WAN2 and WAN3 will bring up different configuration
page. Here, we take WAN1 (ADSL/VDSL2) as an example.
On the next page as shown below, please select the appropriate protocol
according to the information from your ISP. For example, you should select
PPPoE mode if the ISP provides you PPPoE interface. Then click Next for next
step.
P
P
P
P
P
P
o
o
E
E
/
/
P
P
P
P
P
P
o
o
A
A
1. Choose WAN1 as WAN Interface and click the Next button; you will get the
following page.
To Next Page
Loading...
