3
The port “WAN2 / P6” is switchable. It can be used for LAN connection or WAN
connection according to the settings configured in WUI.
Interface Description
Factory Reset
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
USB1~2
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
WAN2 / P6
Connecter for local network devices or modem for
accessing Internet.
LAN P1-P5
Connecters for local network devices.
DSL
Connecter for accessing the Internet.
PWR Connecter for a power adapter.
ON/OFF Power Switch.
To Next Page
Loading...
Need help?
General
