9
LAN P1-P5
On The port is connected.
Off The port is disconnected.
Left LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Right LED
Off The port is connected with 10/100Mbps
No.
Interface Description
Wireless LAN
ON/OFF/WPS
Wireless band will be switched /changed according to the
button pressed and released. For example,
2.4G (On) and 5G (On) – in default.
2.4G (Off) and 5G (On) – pressed and released the
button once.
2.4G (On) and 5G (Off) – pressed and released the
button twice.
2.4G (Off) and 5G (Off) – pressed and released the
button three times.
When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client’s
device making
network connection through WPS.
(3)
Factory Reset
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
(4) USB1~2 / USB
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
WAN1
Connecter for local network devices or modem for
accessing Internet.
(5)
WAN2 / P6
Connecter for local network devices or modem for
accessing Internet.
It is a switchable port. It can be used for LAN connection or
To Next Page
Loading...
Need help?
General
