3
LAN P1-P5
On The port is connected.
Off The port is disconnected.
Left LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Right LED
Off The port is connected with 10/100Mbps
No.
Interface Description
(3)
Factory
Reset
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
(4) USB
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
WAN1
Connecter for local network devices or modem for
accessing Internet.
WAN2 / P6
Connecter for local network devices or modem for
accessing Internet.
It is a switchable port. It can be used for LAN connection or
WAN connection according to the settings configured in
WUI.
(5)
LAN P1-P5 Connecters for local network devices.
PWR Connecter for a power adapter.
(6)
ON/OFF Power Switch.
(7)
Connecter for installing LTE antennas.
(8) SIM 2/ SIM 1 Slots for installing SIM card.
To Next Page
Loading...
