11
Push neck of
SoftShape
TM
Silicone Shield
onto pump connector.
Ensure that both rings
are attached.
Set membrane cap
in place and twist
a ¼ turn to attach.
Drop in membrane and press
down edges to secure.
Twist bottle to thread on to pump connector.
Wash hands before touching & assembling milk collection kit.
All milk-contact components must be disassembled, washed and sterilized prior to rst use.
From the underside of the connector, push
duckbill valve rmly onto the cylindrical
piece inside the pump connector.
1
2
Assembly
To Next Page
Loading...
