10
Pull SoftShape
TM
Silicone Shield
to remove from
pump connector.
DISASSEMBLY:
The SoftShape™ Silicone Shields/Milk Collection Kits come pre-assembled. All milk-contact components must
be disassembled, washed and sterilized prior to rst use.
Twist membrane cap
a ¼ turn and lift
to remove.
Lift membrane from
edge to remove from
pump connector.
Pull tab on duckbill valve to
remove from pump connector.
DO NOT PULL ON POINTED END OF VALVE.
Twist bottle to unthread from the pump connector.
Assembly
To Next Page
Loading...
