LED MESSAGE BOARD
Instructions for
Mac software
www.dreamcheeky.com© 2012 Dream Cheeky Ltd. All Rights Reserved.
This packaging contains:
Before using the product, carefully read this manual and retain it for future reference.
Precautions:
Before using this product, carefully read this manual and retain it for future reference.
Safety:
This product has been designed with the highest concern for safety.
However, any electrical device, if used improperty, has the potential of causing fire, electrical
shock or personal injury. To help ensure accident-free operation, follow these guidelines:
Stop use and unplug the USB cord immediately if the device functions in an abnormal
manner, produces unusual sounds or smells, or becomes too hot.
Use and Handling
1. Do not expose the LED Message Board to high temperatures, high humidity, or direct sunlight.
2. Do not expose the LED Message Board to dust, smoke or steam.
3. Do not allow small particles to get into the LED Message Board.
4. Do not place the LED Message Board on surfaces that are unstable or subject to vibration.
5. Do not throw or drop the LED Message Board, or subject it to physical shock.
Cleaning:
1. For safety reasons, unplug the USB cord from your computer before cleaning.
2. Wipe gently with a damp cloth, and then dry the surface.
3. Do not use solvents or other chemicals to clean the exterior off the LED Message Board.
General:
1. Should the product exhibit unexpected behaviour, unplug the unit and then restart the
computer.
Note: See www.dreamcheeky.com for full online support and trouble shooting.
Installation
Minimum system requirements:
Safety
Note: Install the software before connecting your LED Message Board.
Note:
Using a USB hub or docking station may result in a loss of power. This could create the unit to not work properly. Please plug it directly into the USB port on
your computer.
Installing the Mac program to operate your LED Message Board couldn't be easier. Just follow these simple instructions and you will
be ready to go in no time!
LED Message Board x 1
Instruction Manual x 1
32
1
Open the LEDMessageBoard.dmg file and drag the LED Message
Board icon into your Applications folder. Drag the LED Files folder
DOWNLOAD THE LED MESSAGE BOARD SOFTWARE
54
Open your Applications folder and click on the LED Message
Board icon.
A message may appear, telling you this application was
downloaded from the Internet. Click “Open” to start the LED
Message Board program.
Connect the USB cable attached to the LED Message Board to a
USB port located on your Mac prior to running the program.
Click on (software Mac) under the LED Message Board picture
and save the installation disk on your desktop.
Go to www.dreamcheeky.com and click on “SUPPORT & DOWNLOAD”.
t.BD04PSMBUFS
t"QQMF*OUFM.BD$PNQVUFS
t0OFBWBJMBCMF64#QPSU
t.#PGBWBJMBCMFIBSEEJTLTQBDF
into your Documents
folder, or another
location where you
can easily find it.