Dreame Z10 Pro User Manual

Dreame Support Team
3
● Scan the QR code, download, and install Mi Home.
● Then, enter the home page of Mi Home, tap "+" on the upper right corner, and follow
the instructions to add the device.
Tip: Due to the App firmware difference, the actual operations may differ from the
above.
4. How to reset the wifi of the Dreame Z10 Pro?
A：Open the top cover and observe the Wi-Fi indicator LED. Then press and hold
the Spot Clean button and Dock button until hearing a voice prompts of "waiting for
network configuration.”
When the Wi-Fi indicator starts to flash slowly again, it means the Wi-Fi reset is
successful.
5. How to use the Spot Clean function with Dreame Z10 Pro?
A：

Dreame Z10 Pro Specifications

General

Suction Power	4000 Pa
Dustbin Capacity	400 ml
Water Tank Capacity	150 ml
Battery Capacity	5200 mAh
Charging Time	6 hours
Runtime	150 minutes
Navigation System	LDS Laser Navigation
Auto-Empty Base	Yes
HEPA Filter	Yes
App Control	Yes
Mapping	Yes
Connectivity	Wi-Fi
Cleaning Area	Up to 250 m²
Dimensions	353 x 350 x 96.8 mm
Voice Control	Yes (Alexa, Google Assistant)
Weight	3.8 kg