Dreame Support Team
In standby Mode, press the Spot Clean button to enter Local Clean Mode, where the
robot will clean a square area with a side length of 1.5 meters centered on itself.
After finishing the cleaning, the robot will automatically return to the starting position and
stop working.
6. How to use the Do-Not-Disturb mode with Z10 Pro?
A：The DND mode is enabled by default from 10:00 pm to 08:00 am. You can disable or
edit DND mode with the Mi Home app.
Z10 Pro will stop cleaning and voice reporting during the DND period, and the power
indicator is off.
7. How to use the scheduled clean-up with Z10 Pro?
A：Users can set the schedule clean-up via the APP.
Then, the robot vacuum will automatically start cleaning at the scheduled time and
return to the charging base once the cleaning is finished.
8. How to use the Carpet Boost function when cleaning carpets with the Dreame Z10
Pro robot?
A：Launch Mi Home APP, go to Settings - Device settings and enable Carpet
Boost.
Then Z10 Pro will automatically detect carpets and boost the suction power for
optimal cleaning effect.
Tip: This function could probably be insensitive while using on the carpet.
9. How to use the Advanced Map function with the Dreame Z10 Pro?
A
：
Launch the Mi Home app, tap to start cleaning, and Z10 pro will automatically learn
about the surroundings and begin building a complete map, where you can access Auto
Zone, Area Editor, Zoned Cleanup, Designated Cleanup, Virtual Wall, and other functions.
10. How to save a map with the Dreame Z10 Pro robot?
A
：
When the robot is charging on the Base, launch the Mi Home app, tap to start
cleaning, and Z10 Pro will automatically learn about the surrounding environment and build
up a complete map after several tasks.
Please open all room doors during cleaning to keep the map consistent and
complete.
11. How does the Z10 pro clean up the entire house?
A: When started initially, the robot will clean along the edge of an area by 4.5*4.5m,
then clean the inner part by S-shape path until covering this area. After the area is clean,
it will clean all other rooms in your house by the same principle.
After generating the map, the robot will clean the rooms by the order which edge
cleaning first, then S-shape path cleaning until covering all rooms. It is an efficient way to
prevent any missed areas.
To Next Page
Loading...
Need help?
General
