Drehmo i-matic - Page 2

Document history
File revision
Date
Changes
0 2009-11-15 First release (T-OF)
1 2013-09-06 Description of revised process image. FO signals added. Command STOP added. Enable
signals and ESD signal moved. (T-OF)
2 2014-07-07 Added description for firmware download via IrDA interface. Changed pictures of interface board
to current version. Updated descriptions for diagnosis LEDs. (T-OF)
Update Bus connection
3 2016-02-18 Added signal ESD active to process image, starting with FW rev. V2.02.0010. (T-OF)
Contact
DREHMO GmbH
Zum Eichstruck 10
57482 Wenden
Germany
Service
Tel.: +49 2762 9850-206
Fax: +49 2762 9850-205
E-Mail: drehmo@drehmo.com