Drehmo c-matic - User Manual

DREHMO



C-matic
Electrical actuator with integral controls
Complementary operating manual for drives with
PROFIBUS DPV0/DPV1 interface
Operating manual T.-Nr. 186619
Version 1.6
Date: June, 23
th
2014
INFORMATION
This operating manual has to be used in conjunction
with the operating manual for actuators (from version 1.15)!
This manual must be kept for future use.

Summary

Safety and Warnings

1.1 Standards and Directives

1.2 Commissioning Safety

Essential safety instructions for personnel during electrical device commissioning.

1.4 General Warning Symbols

Explanation of safety symbols and general warnings for installation and use.

Electrical Connection

3.1 Mains Connection

Standard procedure for connecting the actuator's mains power supply, emphasizing safety.

3.2 Bus Connection

Wiring details for the Profibus bus connection, including terminals and switches.

Interface Board Switches and LEDs

4.2 Jumpers

4.3 DIL-Switches

DIL switch settings for Profibus address and redundancy configuration.

4.4 Diagnosis LEDs

Interpreting LEDs for supply voltages, program flow, and system diagnostics.

System Functions and Firmware

6.1 Diagnostics

6.2 Firmware Download

Procedure for updating controller firmware using Matic C Operator.

Drehmo c-matic Specifications

General

Brand	Drehmo
Model	c-matic
Category	Controller
Language	English