Dremel Micro 8050 - Maintenance

19
*5BF935
%& ,*) *)-!#
')+* !%*!'B5F5>D9F5
=19>D5>1>35 @5B6?B=54 2I E>1ED8?B9J54
@5BC?>>5< =1I B5CE<D9> =9C@<139>7 ?6
9>D5B>1< G9B5C 1>4 3?=@?>5>DC G8938
3?E<4 31EC5 C5B9?EC 81J1B4 We recom -
mend that all tool service be performed by a
Dremel Service Center. SERVICE MEN:
Disconnect tool and/or charger from power
source before servicing.
++)!*
51<5BD6?B21DD5B95CD81D1B5>51B9>7D859B
5>4 ?6 <965 If you notice decreased tool
performance or significantly shorter running
time between charges then it is time to
replace the battery. Failure to do so can
cause the tool to operate improperly or
damage the charger.
$&+&)*
The motor in your tool has been engineered
for many hours of dependable service. To
maintain peak efficiency of the motor, we
recommend it be examined every six months.
Only a genuine Dremel replacement motor
specially designed for your tool should be
used.
<51>9>7
+?1F?94133945>DC1<G1IC
25 CEB5 D85 D??< 9C DEB>54
P&Q 256?B5 3<51>9>7 The tool may be
cleaned most effectively with com pressed dry
air. <G1IC G51B C165DI 7?77<5C G85>
3<51>9>7D??<CG9D83?=@B5CC5419B
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed
objects through opening.
5BD19> 3<51>9>7175>DC
1>4 C?<F5>DC 41=175
@<1CD93 @1BDC Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
!
WARNING
$19>D5>1>35
!
WARNING
!
CAUTION
DM 2610031565 05-14-v8_8050 5/13/14 11:45 AM Page 19