hazard when working in such conditions with a
power tool and heating of the liquid caused by
scraping action may cause harmful vapors to
be emitted from workpiece.
2='?9 =+'8 +?+ 685:+):/54 '4* ' *;9:
3'91 ,58 *;9:? '662/)':/549 '4* =.+4
9'4*/4-5<+8.+'* Sanding particles can be
absorbed by your eyes and inhaled easily
and may cause health complications.
!9+96+)/'268+)';:/549 =.+4 9'4*/4-
).+3/)'22?68+99;8+:8+':+* 2;3(+86'/4:
:.': 3'? (+ 2+'* ('9+* 58 '4? 5:.+8
3':+8/'29:.':3'?)54:'/4 )'8)/45-+49 A
suitable breathing respirator and protective
clothing must be worn by all persons entering
the work area. Work area should be sealed by
plastic sheeting and persons not protected
should be kept out until work area is thoroughly
cleaned.
545: ;9+9'4*6'6+8/4:+4*+*,582'8-+8
9'4*/4- 6'*9 Larger sandpaper will extend
beyond the sanding pad causing snagging,
tearing of the paper or kick-back. Extra paper
extending beyond the sanding pad can also
cause serious lacerations.
**/:/54'2',+:?#'84/4-9
GFCI and personal protection devices like
electrician’s rubber gloves and footwear will
further enhance your personal safety.
545:;9+542?8':+*:5529=/:.'
65=+8 9;662?While the tool may appear to
work, the electrical components of the AC
rated tool are likely to fail and create a hazard
to the operator.
++6 .'4*2+9*8?)2+'4 '4*,8++,8535/2
'4* -8+'9+ Slippery hands cannot safely
control the power tool.
+<+256'6+8/5*/) 3'/4:+4'4)+9).+*;2+
,58 ?5;8 :552 #.+4 )2+'4/4- ' :552 (+
)'8+,;245: :5*/9'99+3(2+'4? 658:/545,
:.+ :552 9/4)+ /4:+84'2 =/8+9 3'? (+
3/962')+*586/4).+*589',+:?-;'8*8+:;84
968/4-9 3'? (+ /36856+82? 35;4:+*
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Risk of injury to user. The power cord must only
be serviced by a Dremel Service Facility.
53+*;9:)8+':+*(?65=+8
9'4*/4- 9'=/4- -8/4*/4-
*8/22/4- '4* 5:.+8 )549:8;):/54 '):/</:/+9
)54:'/49).+3/)'29145=4:5)';9+)'4)+8
(/8:. *+,+):9 58 5:.+8 8+685*;):/<+ .'83
53++>'362+95,:.+9+).+3/)'29'8+
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
!
WARNING
-4-
To Next Page
Loading...
Need help?
General
