To Next PageTo Next Page
Need help?Do you have a question about the Dremel Multi-Max MM50-01 and is the answer not in the manual?
General| Corded/Cordless | Corded |
|---|---|
| Variable Speed | Yes |
| Quick Release Accessory Change | Yes |
| Voltage | 120 V |
| Oscillation Angle | 3.2 degrees |
| Cord Length | 6 ft |
| Oscillations per Minute | 10, 000 - 21, 000 OPM |
| Speed | 10, 000 - 21, 000 OPM |
| Amperage | 5.0 Amps |
Key safety warnings and instructions for safe tool operation.
Definitions and explanations of safety alert symbols used in the manual.
Essential safety precautions for operating any power tool.
Guidelines for proper tool operation, maintenance, and storage.
Specific safety precautions for oscillating power tools.
Details further safety considerations including accessory handling and environmental risks.
Defines various symbols related to tool operation and electrical standards.
Explains symbols related to battery recycling and safety certifications.
Welcomes the user and introduces the tool's purpose and features.
Specifies the applications and materials the Dremel Multi-Max is designed for.
Details the tool's components, model, and technical specifications with an illustration.
Step-by-step instructions for attaching accessories via the Easy-Lock system.
Instructions for safely detaching accessories from the tool.
Guides on attaching and changing sanding sheets on the backing pad.
Tips for getting started and understanding the tool's handling and balance.
Explains the variable speed control and recommended speed ranges for various applications.
A guide detailing accessory compatibility and recommended speed settings for different materials.
Describes general uses, flush cutting, and material removal applications.
How to use flat saw blades for precise cuts in wood, plaster, and drywall.
Instructions for using specific blades to remove grout from tiles and surfaces.
Guidance on using scraper blades for removing finishes, adhesives, and carpeting.
How to use sanding accessories for wood, metal, and other surfaces effectively.
Using diamond paper and carbide rasp for grinding away cement, plaster, or wood.
Guide on choosing the correct grit size and type of sanding/grinding sheets for various materials.
Explains when to service the tool and its carbon brushes by a Dremel facility.
Provides instructions on how to safely clean the tool and select appropriate extension cords.
Outlines the terms and conditions of the product warranty, including claims and exclusions.
