Dremel MultiPro 395T6 - Cutting, Sanding, and Polishing Speeds

Page 25
8-10
8
6-10
2-4 2-4 2-4
10
10 10
10
6-8
10
6-8
10
409, 420, 426, 540
542 545 560 561 562
10
8-10 6-10
83142, 83322, 83702, 84922, 85422, 85602,
85622
903, 911, 921, 932, 941, 945, 952, 953, 954, 971,
997, 8153, 8175, 8193,
8215
6
10
4 46
61010
CUTTING ACCESSORIES
612, 640
615, 617, 618, 650, 652
654
10* 10* 10*
10 1010 8
8•
10•
8•
ABRASIVE POINTS
516, 517, 518
500
4-6 4-6
4-6 4-6
8
6-8
6
4-6
CATALOG
NUMBER
SOFT
WOOD
HARD
WOOD
LAMINATES
PLASTIC
STEEL
ALUMINUM,
BRASS, ETC.
SHELL/
STONE
CERAMIC
GLASS
SPEED SETTINGS
* Speed for light cuts, caution burning on deep grooves. • Depending on cutting direction relative to grain.
HIGH SPEED ROUTER BITS
Use only Dremel Tested, High Performance Accessories.
541
453, 454, 455
46
10 1010 8
10
SILICON CARBIDE GRINDING STONES
ALUMINUM OXIDE GRINDING STONES
CHAIN SAW SHARPENING STONES
For use on drywall. For best results, use at 30,000 rpm.
DM 2610916195 4/03 4/28/03 10:53 AM Page 25