Always wear eye protection when lighting
and using the torch.
Keep your hair, and clothing away from the
flame. Loose clothes or long hair can catch
fire. Hot solder may cause burns.
Use only liquid butane fuel when filling or
refilling torch.
Before each use and after refilling, inspect
for leaks. Never use a flame to check for
leaks. If leak is suspected use soapy water
solution and look for continuous bubbling.
Ignite torch away from face, hands,
clothing, or other flammable material.
Discontinue gas flow if torch is
extinguished accidentally.
Always check to make sure that unintended
parts or materials are not being heated.
Heat may be conducted to near objects or
substances that may ignite or become
pressurized when heated.
Use OSHA specified coating removal
methods when preparing plated metal work
pieces for heating.
Always make sure the torch is resting
securely on its stand when handling work
with both hands.
Do not touch the torch flame guard, flame
diffuser, tips and attachments until they
have cooled. Torch flame guard, flame
diffuser, tips and attachments become
extremely hot during use and remain hot after
extinguishing.
Use caution when operating the torch
outdoors. Bright sun makes it difficult to see
flame of the torch. Wind may carry heat and/or
sparks towards you, areas not intended to be
heated, or combustible materials.
Allow the torch to completely cool before
refilling fuel, changing accessories,
cleaning, or storing.
Store torch in well ventilated areas.
Use only Dremel accessories to ensure
proper operation of Dremel VersaTip.
Do not pack this item or any other
flammable gas item in any checked or
carry-on baggage. Department of
Transportation Hazardous Materials
Regulations forbids the carriage of butane or
other flammable gas products on passenger
aircraft.
-4-
SAVE THESE INSTRUCTIONS
Dremel VersaTip 2000 meets or exceeds the CPSC Safety Standard for Multi Purpose
Lighters at 16 C.F.R. § 1212.17(b) and Federal Hazardous Substance Act (FHSA).
To Next Page
Loading...
