-9-
Maintenance & Storage
Maintenance
Clean the exterior of the tool with a clean dry
cloth. If necessary, use a damp cloth.
When soldering, to clean the Soldering Tip,
wipe the tip on a wet sponge while it is still
hot and solder is molten.
Never clean the Soldering Tip with
sandpaper as this reduces its lifetime.
The torch gas nozzle can get clogged due to
butane gas impurities. To return the torch to
full operating condition the nozzle needs to
be replaced. Contact Dremel customer
service to order the replacement nozzle and
instructions.
Storage
Ensure that the Lock-On Button is in the
unlocked position and Trigger is locked out
with the Safety Lock.
Allow several minutes for torch to cool.
When torch is cool, store torch out of reach
of children.
To Next Page
Loading...
