The provided document is a user manual for the Dreo PTC Fan Heater, model DR-HSH007. This fan heater is designed for household use and offers various features for heating and user convenience.
Function Description
The Dreo PTC Fan Heater is a heating appliance that utilizes PTC (Positive Temperature Coefficient) technology to provide warmth. It functions as a fan heater, offering multiple heating levels and an ECO mode for energy efficiency. The device is equipped with a control panel and an LED display for easy operation, as well as a remote control for convenient adjustments from a distance.
Key Functions:
- Power On/Off: Simple touch control to turn the heater on or off. A 30-second countdown occurs after turning off to blow out remaining heat.
- Heat Mode Setting: Allows cycling through three heating levels: H1 (1000W), H2 (1300W), and H3 (1500W). A "Fan Only" mode is also available.
- ECO Mode Setting: Automatically selects the optimal heating power based on the difference between the set temperature (41-95°F) and the ambient temperature. The heater will turn off automatically in 30 seconds if the ambient temperature reaches the set temperature. If the ambient temperature drops below the set temperature, the heater operates on low or high power (1000W or 1500W) depending on the temperature difference.
- Auto-Off Timer: A timer can be set for 0-12 hours, after which the heater will turn off automatically.
- Oscillation: The heater can oscillate to distribute heat more widely.
- Child Lock: A safety feature that locks all buttons on the space heater when activated by a long press (3 seconds) on the control panel.
- Mute/Unmute: Allows turning button sounds on or off.
- Memory Function: The heater remembers its last settings (temperatures, working modes, oscillation status) once turned on again.
- 24-Hour Auto Off: If this feature is ON, the heater will shut off automatically after continuously running for 24 hours. This feature can be turned ON/OFF by long pressing the timer for 3 seconds when the heater is on standby.
Important Technical Specifications
- Model: DR-HSH007
- Rated Power: 1500W
- Input: 120V~ 60Hz
- Heating Levels: H1 (1000W), H2 (1300W), H3 (1500W)
- Temperature Setting Range (ECO Mode): 41-95°F
- Timer: 0-12 hours
- Remote Control Battery: CR2025 3V (lithium button/coin cell battery)
Usage Features
The Dreo PTC Fan Heater is designed with user convenience and safety in mind.
Safety Instructions:
- Always read all instructions before use.
- The heater's surfaces can become hot; avoid bare skin contact.
- Use the handle to move the heater.
- Extreme caution is necessary when used by or near children or individuals with reduced physical, sensory, or mental capabilities.
- Do not insert or allow foreign objects into any ventilation or exhaust opening.
- Do not cover the heater to avoid overheating.
- Do not use the fan heater near flammables and combustibles.
- Do not attempt to modify or repair the product yourself.
- Ensure packaging material is removed before use.
- If the machine is not working, has received a sharp blow, has fallen, or is damaged, contact Customer Support.
- A trace of smoke or odor may occur during the first operation due to manufacturing processes; this is normal and should not re-occur.
- Location Safety: Do not use outdoors. Ensure the heater is on a stable, secure surface. Keep combustible materials at least 3 feet (0.9 m) from the front, sides, and rear of the heater. Do not use in areas where gasoline, paint, or flammable liquids are used or stored. Do not block air intakes or exhaust. Not intended for use in bathrooms, laundry areas, or similar indoor locations where it may fall into a bathtub or other water container.
- Electricity Safety: Always unplug when not in use. Do not operate with a damaged cord or plug. Do not run cord under carpeting. Do not route cord under furniture or appliances. Arrange cord away from traffic areas. To disconnect, turn controls off, then remove plug. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap. If the plug does not fit fully, contact a qualified electrician. This appliance has a polarized plug (one prong is wider than the other).
- Hyperthermia Risk: Hyperthermia can result in death in infants or others. Use caution to avoid overheating. Keep electrical cords, drapery, and other furnishings at least 3 feet (0.9 m) from the front of the heater and away from the side and rear.
- Hot Surface Warning: The front surface can be very hot during use. Do not touch when in use.
Safety Protections:
- Tip-Over Protection: If the heater is tipped over, it will shut off automatically and display "P4" on the LED display.
- Overheat Protection: If the heater overheats, it will shut off automatically and display "FF" on the LED display.
LED Display:
The LED display shows the current temperature, fan only mode, mute/unmute status, plugged-in status, child lock status, and timer status. It also indicates the heating levels (H1, H2, H3) and ECO mode.
Remote Control:
The remote control mirrors the functions of the control panel, allowing adjustment of power, set temperature, heat mode, mute, oscillation, and timer.
Battery Replacement (Remote Control):
- Press the locking button to pop out the battery holder.
- Replace with the same battery type (CR2025 3V) with the (+) side facing up.
- Push the holder until securely locked into place.
- WARNING: Chemical Burn Hazard. Keep batteries away from children. This product contains a lithium button/coin cell battery. If swallowed, it can cause severe internal burns and lead to death in as little as 2 hours. Always secure the battery compartment. If the compartment does not close securely, stop using the product, remove the battery, and keep it away from children. Seek immediate medical attention if batteries are swallowed or placed inside any part of the body. Dispose of batteries properly, keeping them away from children.
Maintenance Features
Proper cleaning and maintenance are essential for the longevity and safe operation of the Dreo PTC Fan Heater.
Cleaning Instructions:
- Always turn off and unplug the heater before cleaning.
- Outer Surface: Use a soft, dry cloth to gently wipe clean the outer surface.
- Air Inlet: Use a soft, dry cloth or a cotton-tipped swab to remove any dust from the air inlet.
Maintenance Restrictions (ATTENTION):
- DO NOT unscrew the unit.
- DO NOT use cleaning agents.
- DO NOT use abrasive scrubbers.
- DO NOT immerse the main unit in water. NEVER allow water to get inside the heater.
- Except for cleaning, any servicing should be performed by an authorized service representative.
- Store in a cool, dry area and keep the cable out of high-traffic areas to avoid tripping hazards.
Troubleshooting
The manual provides a troubleshooting guide for common issues:
- Malfunction codes on LED display:
- E2 - Temperature sensor short circuit: Unplug from power source and contact Customer Support.
- E1 - Temperature sensor open circuit: Unplug from power source and contact Customer Support.
- FF - Overheat Protection: Unplug and wait for it to cool down before plugging in again.
- P4 - Tip-Over Protection: Place the heater back on a flat, level, and stable surface.
- Heater does not start:
- Power cord is not properly plugged in: Connect the plug to a powered electrical outlet.
- Overheat protection has been activated: Unplug and allow it to cool. Remove any objects on or near the heater.
- No power is passing through the unit: Ensure your circuit breaker or fuse is working properly.
- Heater is not placed on a flat and even surface: Ensure your heater is placed on a flat and even surface.
- The set temperature is lower than the ambient temperature: Ensure that the temperature is set to be higher than the ambient temperature.
- The heater suddenly stops during heating:
- The temperature exceeds the threshold of the thermal cutoff: Turn off and unplug the unit. Allow it to cool and plug into the electrical outlet again.
- The heater is tipped over: Place it on a flat, level and stable surface.
- In ECO mode, the heater will turn off automatically when the set temperature has been reached: This is normal. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode.
For problems not listed or if issues persist, contact Customer Support.
Warranty and Customer Care
- Default 12-Month Warranty: The appliance is covered by a Dreo warranty for 12 months from the date of original purchase.
- Extend Warranty to 30 Months: Register the product online at dreo.com/warranty to extend the warranty for free.
- Warranty Exclusions: The warranty does not apply to:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purposes.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual, e.g., connection to an unsuitable mains supply or noncompliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Dreo.
- Dreo provides after-sales service for products sold by Dreo or Dreo authorized retailers and distributors.
- Customer Support Contact Information:
- Email: support@dreo.com
- Website: www.dreo.com
- Phone: (888) 290-1688 (Mon - Fri, 9:00 am-5:00 pm PST/PDT)
- Manufacturer: Shenzhen Hesung Innovation Technology Co., LTD, 26F, Bldg A7, Creative City, Shenzhen, China.
The product is made in China and is Intertek ETL US certified, conforming to UL STD.1278.
Need help?
To Next Page
General
