Need help?Do you have a question about the DRESSTA TD-15H and is the answer not in the manual?
Information about the manufacturer.
Explains cross-reference types, illustration notes, and directional terms.
Explains danger, caution, important, and note symbols used in the manual.
Discusses product identification number (P.I.N.) locations on the machine.
Provides general safety rules and emphasizes operator awareness and proper equipment.
Outlines critical steps and checks before starting the engine.
Covers safe operating practices, including hazard awareness and seat belt use.
Lists safety precautions for authorized personnel performing maintenance.
Provides instructions for safely parking and shutting down the machine.
Illustrates the location of safety decals on the machine and cab.
Covers general precautions and procedures for transporting the machine.
Explains how to safely lift the machine using slings.
Provides critical safety warnings and procedures for towing a disabled machine.
Outlines steps to protect the machine when stored and prepare it for storage.
Provides essential precautions for operating the tractor safely and efficiently.
Explains the use of universal symbols for instruments and controls for operator safety.
Covers the location and function of various instruments and controls on the operator panel.
Describes the function of air conditioning, heater, and accessory controls within the cab.
Details seat adjustment and crucial safety instructions for the seat belt.
Explains how to use the engine speed lever for starting, speed control, and shutdown.
Details transmission neutral lock and shift levers.
Explains hand steering levers and brake/decelerator pedal functions.
Details the blade and ripper control levers.
Important warnings and step-by-step procedures for starting the engine.
Step-by-step procedure for safely stopping the engine.
Safety warnings and sequential steps for driving the machine.
Explains how the transmission shift lever controls forward/reverse speeds.
Addresses torque converter overheating and how to steer the machine.
Procedures for stopping, downgrade operation, and crossing obstacles.
Provides suggestions for parking the machine safely, including on slopes.
General introduction to operating mounted equipment like blades and rippers.
Details the positions and functions of the blade control lever (Hold, Raise, Lower, Float).
Explains how to operate the ripper control lever for raising and lowering.
Procedures for tilting and leveling the blade using mechanical or hydraulic methods.
Details how to adjust the blade pitch using upper struts.
Steps for adjusting the blade's diagonal angle.
Procedures and techniques for ripping operations, including cold weather.
Principles for optimizing fuel consumption and machine operation.
General safety precautions for servicing the machine.
Provides a guide for maintenance tasks based on operating hours.
Outlines daily checks for machine condition and safety.
A chart detailing service intervals, points, and lubricants.
Lists refill capacities, types, and specifications for various lubricants and fluids.
General information on lubrication, selection, viscosities, and recommended lubricants.
Preparing the machine for seasonal temperature changes, including cooling system checks.
Details the air cleaner system, elements, and service procedures.
Visual inspection and tension checks for drive belts.
Information on the cooling system, coolant, antifreeze, and radiator cap.
Maintenance for circuit breakers, batteries, and wiring.
Procedures for checking and changing engine oil and filter, and adjusting valves.
Procedures for filling the fuel tank, cleaning strainers, and replacing filters.
Procedures for checking/changing hydraulic oil, and servicing filters and strainers.
General information and procedures for lubricating various fittings.
Procedures for blade removal/installation, adjustments, and servicing the ripper.
Procedures for checking and changing oil in the final drives.
Procedures for lubricating universal joints, checking oil, changing oil, and servicing filters.
Checking undercarriage condition, track shoe bolts, and track tension.
Describes the dozer's applications and provides an overview of its systems.
Provides detailed measurements for the dozer's dimensions.
Lists capacities for fluids and specifications for the dozer's tracks.
Engine specifications, torque converter details, and travel speed data.
Approximate weights and fuel consumption figures for the machine.
Tables of special, metric, and English fastener torque values.
A list of recommended tools for removal and installation procedures.
Diagrams illustrating the drive train for two-speed and one-speed steering.
Diagrams of the equipment and transmission hydraulic systems.
Overall and cab wiring schematics with keys.
To Next Page
General