15
Using the Remote
PAIRING THE REMOTE
1. Power on your Ghost 4k, navigate
to the settings menu, and scroll to
the ‘Pair Remote’ option.
2. Press the rear button on
the Ghost 4K to start pairing, and
press either button on the remote
when prompted.
3. The Ghost 4K will confirm if the
pairing is successful. You are now
ready to control the Ghost 4K with
the Drift Remote.
USING THE REMOTE
Once connected to your Ghost 4K, a
single press of the capture button will
begin recording in the chosen camera
mode. The LED indicator will reflect the
chosen recording mode:
Press the mode button to cycle through
recording modes or to stop recording.
The Drift Remote Control allows wireless Bluetooth® connection to your
Ghost 4K, enabling you to set modes at a distance with the push of a button.
LED Indicator:
Green – Video
Yellow – Photo
Purple – Timelapse
Cyan – Photoburst
To Next Page
Loading...
Need help?
General
