Installing Your Drinkpod
Installing Your Drinkpod 2-7
Diagram 2.3(B).3 Turn On Cold Water In Sink
4. Now turn the handle of
KS-F
Cold Water Shuto Valve clockwise until it won’t turn
any further. If your faucet stops pouring water, we’ve conrmed this is your cold water
shuto. If it doesn’t turn o, then it is the valve on the left.
Diagram 2.3(B).4 Shuto Cold Water Source Valve
5. Use our pliers, crescent wrench, or 11/16 in. wrench to loosen
KS-G
Cold Water Feed Line from
KS-F
Cold Water Shuto Valve. IF THE WRENCH
FITS, continue to loosen and detach the hose, and proceed. IF IT DOESN’T FIT, the
To Next Page
Loading...