1. This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the
equipment in a dry place with as little temperature variation as possible.
2. We recommend placing a mat beneath the equipment to protect both the equipment
and your Booring.
3. Always place the equipment in a dry environment.
4. Use a warm, damp cloth to keep the product clean.
5. No wet cleaning of electrical components. Unplug before any care and maintenance.
6. The safety level of the equipment can be maintained only if it is regularly examined for
damage and wear. Th is includes any ropes, pulleys, nuts, bolts, moving parts, bushes,
chains, wheels, bearings & connection points etc.
7. Ensure that you inspect the product regularly - at least once a week is recommended.
8. Ensure that all pxings are tight before use.
9. Always replace damaged / worn components with original parts from the manufacturer.
Precautions before Use
Maintenance
1. Slide Rail: Before sitting on the machine, please firstly check if the seat wheels and slide
rail for dust and foreign bodies. Little small things will obstruct the seat wheels and slide
rails and damage their surface. The slide rails must be checked for debris before each use
and cleaned regularly.
2. Fasteners: The bolts need to be checked for tightness at the end of the first month after
use and every 12 months.
3. Placement: When storing your rowing machine vertically, choose a suitable location.
Choose a flat surface to useyour rower on to avoid shaking and premature wear.
Customer Support
1. Should you require any assistance regarding this product please gather the following
information and then contact us using the details below.
2. Order Number: The number you receive after you make your purchase;
3. Original purchase date;
4. Platform of Purchase, such as eBay, Amazon, etc;
5. Information about the place and conditions of use;
6. Precise description of the issue / defect
7. The best way to contact us is via our official customer service email:
dripex.co.uk@outlook.com
To Next Page
Loading...