Dritz 574 - Applying 5;32 Inch Eyelets

Para ver las instrucciones en español,
por favor visite www.dritz.com/574
574 EYELET PLIERS – Instructions (continued)
Pliers Tools:
Eyelet Part:
Turquoise Eyelet
Holder
Metal Splitting
Punch
Eyelet
Instructions for Applying ⁵∕
₃₂
" Eyelets
Inserting Tools:
Insert metal splitting punch in
one side of pliers and turquoise
eyelet holder in other side.
Instructions:
1. Insert eyelet post into hole with eyelet
front on right side of fabric.
Removing Tools:
Slip hook of gray tool remover
inside ledge of pliers and press
down to release tool.
Repeat for opposite side.
2. With eyelet holder at bottom of pliers,
place fabric and eyelet into holder.
3. Squeeze pliers rmly to apply eyelet. Check
for tightness; squeeze again, if necessary.
Eyelet will split and roll back over fabric.
1. 2. 3.
3.
Right side
of fabric
Wrong side
of fabric
Wrong side
of fabric
Wrong side
of fabric