Dritz 574 - Applying 1¼ Inch Eyelets

Pliers Tools:
Eyelet Parts:
Lime Eyelet
Holder
Metal Splitting PunchWasher
Eyelet
Para ver las instrucciones en español,
por favor visite www.dritz.com/574
Instructions for Applying ¼" Eyelets
574 EYELET PLIERS – Instructions (continued)
Inserting Tools:
Insert metal splitting punch in
one side of pliers and lime
eyelet holder in other side.
Instructions:
1. Insert eyelet (deep half) into hole with
eyelet front on right side of fabric.
Removing Tools:
Slip hook of gray tool remover
inside ledge of pliers and press
down to release tool.
Repeat for opposite side.
2. Place washer (shallow half) over post
of eyelet.
3. With eyelet holder at bottom of pliers, place
fabric and eyelet into holder.
4. Squeeze pliers rmly to apply eyelet. Check for
tightness; squeeze again, if necessary. Eyelet will split
and roll back
over washer.
Right side
of fabric
1.
4.
4.
2. 3.
Wrong side
of fabric
Wrong side
of fabric
Wrong side
of fabric
Wrong side
of fabric
Washer
Fabric
Eyelet