What to do if my Drive 14001E doesn’t work?
If your Drive Water Pump isn't working, first, make sure the plug is firmly inserted into the outlet and that the power switch is turned on. If the power indicator is on but the pump still doesn’t work, contact your local dealer immediately. If the power indicator is off, try connecting the power cord to another outlet. If it's still off, contact a qualified electrician to check the main power.
What to do if my Drive 14001E has incomplete inflation (low pressure)?
If your Drive Water Pump is showing incomplete inflation or low pressure, quickly adjust the pressure to Firm. Check the inflation tubes connected to the pump to ensure they aren't twisted or disconnected, and that there are no leaks. Keep the tubes straight and change them if you notice any leakage.
General| Brand | Drive |
|---|---|
| Model | 14001E |
| Category | Water Pump |
| Language | English |
Overview of the Med Aire series as a high-quality air support system for pressure ulcer prevention and treatment.
Details the system's purpose in reducing pressure ulcers and optimizing patient comfort for home and care settings.
Lists patient conditions where alternating pressure therapy is contraindicated, such as traction or spinal cord injuries.
Explains the polarized plug feature to reduce the risk of electric shock and how to handle it.
Guidance on setting the pressure-adjust knob for optimal comfort and firmness based on patient needs.
Procedures for cleaning and decontaminating the pump unit, including warnings against immersion or specific solutions.
Instructions for cleaning and disinfecting the bubble pad, including specific solutions and drying methods.
Technical specifications for the pump, including power supply, air output, pressure range, cycle time, fuse, size, and weight.
Technical specifications for the mattress, including size, cell count, material, and color.
To Next Page
